The night vision may stop working sometimes, in such a case you can turn on the IR light by tapping into the icon given on the right side of the screen. Now go into advanced settings and then ‘’User Setting’’, where you can change the default password and tap the right button to save. Press the button ‘’>’’ and you will get access to Edit Camera Page. For example, change the default password.There are some points to keep in mind after the setup. In case it does not connect to the wi-fi then to set up the camera you can connect it with ethernet camera and tap ‘’ Add camera via wired method’’ If the camera shows online you can install the camera on any other place which has a good Wi-Fi signal.Once the wi-fi configuration is successful you can modify the user name and password according to your preferences. You can keep admin as your user name and 123456 as a default password.Check whether the blue light of the camera is flashing slowly, and if that is the case then tap on the button ‘’Blue light is flashing slowly’’, after that to name the camera scan the bottom of the camera and give it a name.Now after launching the Wansview app press the add button and it will take you to add a camera page where you select the option of adding cameras via Wi-Fi mode.Then power on the camera with the provided power supply and keep it nearby your router.Now to download the Wansveiw cloud app on your preferred and supported device, you will have to scan the generated QR code.Also, ensure that the camera is compatible with the microphone and night vision on the blue iris. Press the OK button and the camera will get connected directly.All the other information cannot be changed. If you are shown ch0 it means a different stream. When you click the find or inspect it will automatically search the path.cloud app and press the inspect or find option.Input the port that you set on Wansview.You will get an option to fill port on the Discovery or ONVIF port.Then input your username and password as given on the Wansveiw cloud app.Hit the + button so that you can add the Wansview 1080P camera on Blue Iris.You can change your user name and password later. First of all, you need to enable the ONVIF feature and verification on the settings page on the Wansview cloud app and the app will automatically generate your username and password.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |